Sunday, November 25, 2012

2012 Christmas Auctions Have Begun!

I just posted the first of the 2012 Christmas Ornament Auctions. We're starting with a moonbus, space plane and a pod. We've got a bunch of other stuff lined up to paint right now so we'll see how much of it makes it to auction. In addition to the abovementioned pieces, we should be listing some Aries Landers and maybe a Discovery or two. I've got some NSEA Protector Ornaments queued up as well, but just want to see if that was ever released as an official Hallmark Ornament before I list them.

See the current auctions HERE.

Sunday, November 18, 2012

Christmas (auctions) are coming...


There will be the usual 2001 stuff and a couple of 1/100th scale Battletech mechs for good measure...

yup...

any day now...

Saturday, November 10, 2012

V-FLASH and 3D Systems

V-FLASH... every printout is an adventure. Y'know the kind... where most everybody dies from exposure or starvation and you end up eating your bunkmate. Sigh. Only five months til I get my Form1. Then life will be sweetness and roses... (I can hope)

Our friend Scott over at Messy Desk wanted a 1/60th scale Whitworth, so I thought I'd give it a go on the V-FLASH this weekend.

Lets see... took me an hour and a half to clean and prep the printer. First it needed cleaning. Then the resin in the cartridge needed to be mixed (it kept coming out clear and inconsistent). Then the header came off the tranparent feeder. Then I found the missing pin and reassembled it. Then I put the cartridge back together without the resin feed tube connected. Then I took it apart again. Then I lost a spring from the drive coupler. Then I found the spring again. Then I put the cartridge back together. Then I cleaned it again. Then I started printing.





So maybe, just maybe, there's a 1/60th scale Whitworth printing as I type...

ARRRRRRGGGGHHHHH!!!! I coulda had an Objet by now...

Why 3D Systems would continue to use FTI technology in their new Projet Printers is beyond me.